What is what to do when candle wick is too short?

When a candle wick is too short, the candle may struggle to stay lit, produce little to no flame, or tunnel (burn down the center, leaving a lot of wax on the sides). Here's what you can do:

• Pour off excess wax: Carefully pour off some of the melted wax into a heat-safe container while the candle is lit. This will expose more of the wick. Be extremely cautious, as the wax will be hot. Stop pouring when the wax level is about ¼ inch below the top of the wick.

• Melt the wax around the wick: Use a heat gun or hair dryer to gently melt the wax around the <a href="https://www.wikiwhat.page/kavramlar/candle%20wick">candle wick</a>. This will create a deeper pool and expose more of the wick. Be patient and avoid overheating the wax.

• Scoop out excess wax: Use a spoon or other tool to carefully scoop out excess wax from around the wick. Be careful not to damage the <a href="https://www.wikiwhat.page/kavramlar/candle%20wick">candle wick</a>.

• Use a wick pick or tweezers: While the wax is soft, use a wick pick or tweezers to gently pull the <a href="https://www.wikiwhat.page/kavramlar/candle%20wick">candle wick</a> upwards, exposing more of it. Be careful not to pull too hard, as this could dislodge the wick from the base.

• Extinguish and trim the wax: Extinguish the candle and let the wax cool slightly, but not harden completely. Then, use a sharp knife or trimmer to carefully carve away the excess <a href="https://www.wikiwhat.page/kavramlar/candle%20wax">candle wax</a> surrounding the wick.

• Use a wax warmer: If you're unable to fix the wick, consider using the remaining wax in a wax warmer. This allows you to still enjoy the fragrance without the need for a flame.